Granulator / Pellet mill PELLETNIK-260 | 15 kW

Technomashbud offers you a new pelletnik-260 granulator model. The novelty is designed for the production of pellets and feed mixtures on a professional scale. It will perfectly work as a basis for building a business producing pellets from waste and sunflower husks, straw, sawdust and any other biomass.

The main requirements for raw materials are the bulk fraction and a moisture level not exceeding 14%.

Pelletnik-260 is made on the basis of a solid housing, inside which a belt drive of torque from the engine to the module of the working part is realized. This allowed to abandon the use of gearboxes, and thus increase the reliability of the product.

Video: performance measurement of pellet maker PELLETNIK-200 | pine + oak sawdust:

The use of a low-speed engine with increased torque contributes to the stability of the maintenance of the working speed. The engine power is 15 kilowatts. An important advantage of this granulator is that it is made on a high housing, which, with certain skills, allows you to install a sifter for mass production of fuel pellet. The pellet production capacity of the granulator can reach a maximum value of up to 250 kg per hour.

Each Granulator is equipped with a die for the customer's choice. At the request of the customer, for an additional fee, the granulator can be equipped with an additional pulley, which can be installed to achieve maximum efficiency in the production of feed (in this case, the capacity can reach up to 400 kg per hour). Note: the smaller the particle fraction size of the raw material, the higher the granulator performance will be.

The possibility of lubricating the bearings of the central shaft of the granulator is realized by the calamitka in a specially designated place on the housing. Regular maintenance of the most heavily loaded roller bearings also requires a grease change. For this purpose, in the axis of the rollers there are connection points of the oil supply tawdry. Please note that it is recommended to replace the grease when the rolls are in a heated state after work, and it is necessary to stop pumping only when fresh grease begins to flow out from the starting point.

Specification:

Engine-15 KW x 750R / min;

Performance:

Feed: up to 400 kg / hour

Pellet: up to 200 kg / hour